Craftsman 4 Gallon Twin Tank Compressor Manuel du propriétaire télécharger pdf (Page 9)

Regulator pressure gauge

The current line pressure is displayed on the regulator pressure

gauge. This pressure can be adjusted by rotating the pressure

regulator knob.

Safetyvalve

This valve is designed to prevent system failures by relieving

pressure from the system when the compressed air reaches a

predetermined level. The valve is preset by the manufacturer and

must not be modied in any way. To verify the valve is working

properly, pull on the ring. Air pressure should escape. When the

ring is released, it will reset.

Tank pressure gauge

The tank pressure gauge indicates the pressure of the air in the

tank.

Drainvalve

The drain valve is used to remove moisture from the air tank after

the air compressor is shut off.

Motorthermaloverloadprotector

This air compressor is equipped with a thermal overload device

which will turn the air compressor off automatically, if the air

compressor becomes overheated. If the motor turns OFF

repeatedly, check for the following possible causes first: Low

Voltage from the outlet. Lack of proper ventilation or outside air

or room temperature too high. Extension cord too long or wrong

gauge wire used.

To reset the air compressor:

Turn the air compressor off.

Unplug the air compressor, and allow it to cool for 30 minutes.

Plug the air compressor into an approved outlet.

Turn the air compressor on.

Airlterintake

This lter is designed to clean air coming into the pump and

requires no maintenance when operated in accordance with the

warnings and operating instruction outlined in this manual. To

ensure the pump continually receives clean, cool, dry air do not

operate this compressor in dust lled atmosphere. Ventilation

openings must be kept free from obstructions.

ATTACHING HOSE

Insert the hose into the quick coupler already installed on the

compressor (see g. 3).

Do not attach any tools to the open end of

the hose until start-up has been completed.

Firmly grasp the open end of the hose; hold facing away from

yourself and others.

WARNING

BREAKINGINTHEPUMP

See gures 3 - 4.

Check and tighten all bolts, ttings, etc.

Turn the pressure regulator knob fully clockwise to open the

air ow. Turn the locking nut clockwise to lock.

Place the switch in the OFF(O) position and plug in the power

cord.

Open the drain valves completely.

Turn the air compress ON(l) and run the air compressor for

10 minutes to break in pump parts.

Place the switch in the OFF(O) position.

Close the drain valves.

Allow the unit to cool for 30 minutes.

Fig. 4

Drainvalve

Fig. 3

Quick

couplers

On/Off

switch

Locking

nut

Pressure

regulator

knob

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Craftsman 4 Gallon Twin Tank Compressor Manuel du propriétaire Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Compresseurs d'air Craftsman 4 Gallon Twin Tank Compressor