Craftsman 28180 - Fixed-Base Router/Table Combo Manuel télécharger pdf (Page 48)

Dust Extraction Hood for Plunge Base (Fig. 36a)

To attach the hood onto the

plunge base, position and

secure it to the back of the base

with the two screws (included),

as shown in Fig. 36a.

The dust extraction hood can

also be installed with the hose

outlet facing the front of the

plunge base by removing the

chip shield and attaching the

hood at the front of the base.

Dust Extraction Hood for D=

Handle Base (Fig. 36b)

Fig. 36a

To attach the hood onto the

D-handle base, align the two

tabs on the hood with the

two slots on the port at back

of the base, and secure it by

turning it clockwise (Fig. 36b).

WARNING: Always turn

the router motor off and

unplug the router from the

power source before making

any adjustments or installing

accessories. Failure to turn

router motor off and unplug

the router could result in

accidental starting, which can cause serious personal injury.

Tow Screws Included

Fig ---'_"

28084 Manual Revised 07-0712 Page 48

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 67 68

Pas de commentaire

Craftsman 28180 - Fixed-Base Router/Table Combo Manuel Page 48