Craftsman 247.770550 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel de jardinage Craftsman 247.770550. Craftsman 247.770550 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 21
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
6.0 Horse Power
YARD VACUUM
Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A.
Printed in U.S.A.
Operator’s Manual
ES
Safety
Assembly
•Operation
Maintenance
•Parts
•Español
Visit our Sears website: www.sears.com/craftsman
Model No. 247.770550
CAUTION: Before using
this product, read this
manual and follow all
Safety Rules and
Operating Instructions.
FORM NO.
769-00407A.fm
(10/02)
Vue de la page 0
1 2 3 4 5 6 ... 20 21

Résumé du contenu

Page 1 - Operator’s Manual

6.0 Horse PowerYARD VACUUM Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A.Printed in U.S.A.Operator’s ManualES• Safety• Assembly•Operation•

Page 2 - PRODUCT SPECIFICATION

10 Figure 87. Standing behind the unit, grasp starter handleand pull rope out until you feel a drag.8. Pull the rope with a rapid, continuous, full ar

Page 3 - PREPARATION

11Figure 10 IMPORTANT: The flail screen is located inside the housing in the discharge area. If the flail screen becomes clogged, remove and clean as

Page 4 - MAINTENANCE AND STORAGE

12GENERAL RECOMMENDATIONS• Always observe safety rules when performing any maintenance.• The warranty on this Yard Vacuum does not cover items that ha

Page 5 - ATTACHING THE HANDLE

13TO DRAIN OILDrain oil while engine is warm. Follow the instructions given below.• Drain the gas tank, start the engine and let it run until the fuel

Page 6 - ATTACHING THE BLOWER CHUTE

14WARNING: Do not at any time make anyadjustment to the unit without firststopping engine and disconnectingspark plug wire.Nozzle Height AdjustmentThe

Page 7

15SHARPENING OR REPLACING CHIPPER BLADEBecause the engine on this unit has a tapered crankshaft, a special impeller removal tool (part number 753-0900

Page 8 - Meets ANSI safety standards

16STORAGE Prepare your Craftsman Yard Vacuum for storage at the end of the season or if the unit will not be used for 30 days or longer. A yearly chec

Page 9 - TO START ENGINE

17NOTE: For repairs beyond the minor adjustments listed above, please contact your local Sears Service Center.Problem Possible Cause(s) Corrective Act

Page 10 - Using the Nozzle Vacuum

18Sears Craftsman 6.0 H.P. Yard Vacuum Model 247.770550PARTS LIST 234567894711121314151617181920211123242526222728292430313233343536373839411404142434

Page 11 - Nozzle Height Adjustment

19Sears Craftsman 6.0 H.P. Yard Vacuum Model 247.770550Ref. No.Part No. Part Description2. 749-1423 Upper Handle3. 720-0279 Knob4. 712-3004A Flange Lo

Page 12 - LUBRICATION

2WARRANTYTABLE OF CONTENTSContent PageWarranty 2Safety 3Assembly 5Operation 8Maintenance 12Content PageService and Adjustments 14Storage 16Troubleshoo

Page 13 - CLEAN ENGINE

20Sears Craftsman 6.0 H.P. Yard Vacuum Model 247.77055012345678910111213141516171819202117222324252627282930313233343536153738394041424344585556596047

Page 14 - REMOVING THE FLAIL SCREEN

21Sears Craftsman 6.0 H.P. Yard Vacuum Model 247.770550Ref. No.Part No. Part Description1. 664-0094 Bag Assembly2. 681-0154 Screen Assembly3. 710-1054

Page 15

3WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself

Page 16 - Yard Vacuum

4i. Never store the machine or fuel container inside where there is an open flame, spark, or pilot light (e.g. furnace, water heater, space heater, cl

Page 17 - TROUBLESHOOTING

5Figure 1IMPORTANT: This unit is shipped without gasoline or oil in the engine. After assembly, see OPERATION section of this manual for proper fuel a

Page 18 - PARTS LIST

6• Secure the two handles by tightening the upper wing nuts (carriage bolts must be seated properly into the handle).• Remove the hairpin clips from t

Page 19

7• Raise the nozzle height to the highest setting when using the blower chute. Refer to nozzle height adjustment in the ADJUSTMENT section.NOTE: The

Page 20

8Know Your Yard VacuumRead this operator’s manual and safety rules before operating your Yard Vacuum. Compare the illustrations below with your equipm

Page 21

9Hose AssemblyUsed as an alternative to the nozzle to vacuum yard waste such as leaves or pine needles in hard to reach places.Hose HandleUsed to guid

Commentaires sur ces manuels

Pas de commentaire