Craftsman 28180 - Fixed-Base Router/Table Combo Manuel télécharger pdf (Page 14)

ATTACHING THE LEGS TO THE TABLE TOP

Place the router table

surface upside down on

a flat, level surface, with

the underside of the table

facing up.

Position the legs relative to

the router table as shown

in Fig, 2.

Position one short end of

the table so that it extends

beyond the edge of your

work surface far enough

to gain access to the four

holes in that end of the

router-table top.

Align the two outermost

holes on the table top with

the holes in the leg bracket.

Fig, 2

Place a flat washer (12)onto

each of two short, pan-head

screws (8),Insert the short,

pan-head screws up through

the holes in the table and

through the holes in the leg

brackeL Place a small washer

(12).a spring washer (13),and

small nut (10)on the threads

of the screw. Loosely tighten

the nuts. (Fig. 2)

Place a flat washer (12)

onto each of two long,

pan-head screws (7). Insert

the long, pan-head screws

up through the other two

holes on the table top

and through the corresponding holes in the leg. Place a small washer (12), a

spring washer (13). and small nut (10) on the threads of the screw. (Fig. 3)

7. Securely tighten all fasteners.

8. Repeat with the other leg,

28180 ManuaLRevisad_074:)228 Page 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Pas de commentaire

Craftsman 28180 - Fixed-Base Router/Table Combo Manuel Page 14