Craftsman 580.762250 Manuel d'utilisateur

Owner’s ManualCRnFTSMRN6.0 HORSEPOWER 2250 PSI 2.2 GPMHIGH PRESSURE WASHERModel No. 580.762250CAUTION: Before using this product, read this manu

You have assembled your high pressure washer and have prepared the engine for starting. You are now ready to clean your car, boat or the outside of a

MAINTENANCECUSTOMER RESPONSIBILITIESMAINTENANCE SCHEDULEFILL IN DATES AS YOU COMPLETE REGLMJVR SERVICEHOURLY OPERATING INTERVALMAINTENANCE TASKBefore

BEFORE EACH USECheck water inlet screen for damage.Check high pressure hose for leaks.Check detergent inlet hose and filter for damage. Check gun and

CLEAN/REPLACE SPARK PLUGChange the spark plug every 100 hours of operation or once each year, whichever comes first. This wiil heip your engine to ste

SERVICE AND ADJUSTMENTSCARBURETORIf you think your carburetor needs adjusting, see your nearest Sears Service dealer. Engine performance may be affect

STORAGEAFTER EACH USEWater should not remain in the unit for long periods of time. Sediments of minerals can deposit on pump parts and “freeze” pump a

TROUBLESHOOTINGPROBLEMCAUSECORRECTIONPump has following problems: failure to produce pressure, erratic1. Nozzle in low pressure mode.1. Pull nozzle ba

TABLE OF CONTENTSSAFETY RULES...2-3ASSEMBLY...

• Units with broken or missing parts, or without protective housing or covers should NEVER be operated.• The muffler and air cleaner must be install

ASSEMBLYCARTON CONTENTSThe following parts are shipped loose with your pressure washer:• Main Unit — pressure washer with wheels and guide handle• P

Cut tie wrap from high pressure hose. Connect high pressure hose to gun with either two adjustable wrenchs or one 11/16” and one 7/8” wrench.Place ass

OPERATIONREAD THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR HIGH PRESSURE WASHER. Compare the illustrations with your high pressure

IF YOU HAVE ANY PROBLEMS operating your pressure washer, please call the pressure washer helpline at 1-800-222-3136.HOW TO USE YOUR PRE

To apply detergent follow these steps:• Prepare the detergent solution as required by the job.• Hang the detergent solution on the “J” hook on the w

BEFORE STARTING THE PRESSURE WASHERTo operate the engine you will need to do the following: ENGINE OIL• A 20 oz. bottle of SAE 30 weight oil is includ