Operator's ManualCRRFTSMflN1/2 in. HAMMER DRILLDouble InsulatedModel No. 315.101360Save this manual for future reference^ CAUTION: Read and follo
OPERATIONTO INSTALL BITSSee Figure 9. Unplug your hammer drill.^ WARNING: Failure to unplug your hammer drill could result in accidental start
OPERATIONDRILLINGSee Figure 11. Depress and release switch trigger to be sure your drill is in OFF position before connecting it to power supply.
OPERATIONCHUCK REMOVALSee Figure 12.The chuck must be removed in order to use some accessories. To remove: Unplug your drill.A WARNING: Failure to u
MAINTENANCEGENERALOnly the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer. All other parts represent an i
ACCESSORIESThe following recommended accessories are currently available at Sears retail stores. High Speed Bits {For wood or metal) Masonry Bits
NOTESPage 15
TABLE OF CONTENTSTable ot Contents...
GENERAL SAFETY RULESTool Use and Care Use clamps or other practical way to secure and support the workpiece to a stable platform.Holding the work by
SPECIFIC SAFETY RULESHold tool by Insulated gripping surfaces when performing an operation where the cutting toot may contact hidden wiring or its cor
SYMBOLSimportant: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these sy
FEATURESKNOW YOUR HAMMER DRILLSee Figure 1.Before attempting to use your hammer drill, familiarize yourseif with ali operating features and safety req
OPERATIONSWITCHSee Figure 2.To turn your hammer drili ON, depress the switch trigger. Release switch trigger to turn your hammer drill OFF.LOCK-ON BUT
OPERATION Form a loop by forcing end with round holes through slotted hole opposite end. Place the loop over the cord and pull it tight. Mount t
OPERATIONTo Adjust: To adjust, loosen the auxiliary handle assembly by turning the handle counterclockwise. Rotate auxiliary handle assembly to de
Commentaires sur ces manuels