Craftsman 82337 Manuel du propriétaire télécharger pdf (Page 9)

BATTERY INSTALLATION

WARNING: To avoid electric shock, disconnect the test leads

from any source of voltage before removing the battery cover.

1. Disconnect the test leads from the meter.

2. Remove the rear battery cover by removing the two screws

using a Phillips head screwdriver.

3. Insert the battery into battery clips, observing the correct

polarity.

4. Put the battery cover back in place and secure with the two

screws.

WARNING: To avoid electric shock, do not operate the meter

until the battery cover is in place and fastened securely.

NOTE: If your meter does not work properly, check the fuses and

battery to make sure that they are still good and that they are

properly inserted.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

Pas de commentaire

Craftsman 82337 Manuel du propriétaire Page 9